Hot forming machines
Our products
FULLY AUTOMATIC | HEAT-CONTROL | HIGH-PRECISION
If you produce fasteners made of exotic alloys, then you know how crucial the heating of the material is. Our machines include a heat-control system that guarantees +/- 5 degrees Celsius tolerance for every part produced.
Fully Automatic
Our hot forging machines work in a horizontal position. Blanks will be separated in a step feeder and will be positioned by a servo motor in to the position with the correct amount of material in the induction heating coil. After reaching the heating time and correct temperature, controlled by Spectral Pyrometer, the servo will position the material for the forming process and a hydraulic cylinder will be activated to forge the product in the closed die system.
Heat-Control
Our machines are equipped with the latest induction heating control system allowing temperature control on the heated product by pattern and Temperature. This technology combined with the high speed Programmable Logic Controller (PLC) will accurately measure the product temperature 0.1 seconds before forming takes place. The temperature detected will be stored and recorded and can be documented to verify that every product was formed within the specified material temperature.
High-Precision
All machines are equipped with servo motors and have the possibility to repeat every product set up. This allows quick changeover times of ~10 minutes for small, medium and large productions. In addition, our machines are equipped with length measuring systems to monitor and compensate the forming process of each product. This ensures correct and repeatable head volumes.
Applications
Headed fasteners, ejector pins, punches and perforators for the aircraft, aerospace, nuclear, defence, race car, oil and chemical fastener industries.
In addition, our machines are equipped with length measuring systems to monitor and compensate the forming process of each product. This ensures correct and repeatable head volumes.
Exotic Alloys
The machines form exotic alloys such as Titanium, Waspaloy, Inconel, Duplex, Hasteloy, Monel A286, Stainless steel and others.
Hot Forming Machines Platform:

FMS – 1D1B
Automatic hot forging machine with one die one-blow function, designed for simple head configurations such as Hex, Round, 12 Points and Spline.

FMS – 1D2B
Automatic hot forging machine with one die two-blow function, Allows the use of a preform and a finish tool to form Heads with recess and other complicated shapes.

VMS – 2D3B
Automatic hot nut forming machine with three die two-blow function, engineered for the manufacturing of Nuts in several forming steps.

AFM – 1D1B
Automatic hot forging machine with one die one-blow function, perfect for products with long shafts up to 1000mm in length.